| G5477-67806 |
FRU, LT Tip Adaptor Asm, Encore, SCP |
8746.3 |
| G5477-67807 |
FRU, ST Tip Adaptor Asm, Encore, SCP |
6681.6 |
| G5477-67808 |
FRU, XLT Tip Adaptor Asm, Encore, SCP |
5833.9 |
| G5477-67809 |
FRU,Tips Off Leadscrew Assy, Encore, SCP |
12352.5 |
| G5477-69424 |
EXCH-FRU, Robot Arm Assembly, Tested |
93655.6 |
| G5477-69425 |
EXCH-FRU, Robot Hand Assembly, Tested |
48797.1 |
| G5477-69618 |
EXCH-FRU, Gantry, YZW, Tested |
250991.9 |
| G5477-69814 |
EXCH-FRU,SingleChannelPipettorAsm,Tested |
40177.3 |
| G5477-80100 |
Package Kit, Encore |
23530.6 |
| G5477-80200 |
Pkg, Ship Kit-Encore |
13595.6 |
| G5477-80600 |
Gantry Foam Stabilizer |
1035.5 |
| G5481-60001 |
Lid Store Hotel, 10 Pos, 5V |
127460.3 |
| G5481-60003 |
Cable, PCB to PCB, Lid Hotel, 5 V-DC |
3571.4 |
| G5481-60005 |
Lid Store Hotel,10 Pos,5V,Stiff Spring |
536917.3 |
| G5481-60867 |
Cable, DC Power, 5.5mm Jack x 2.5mm Pin |
5987.5 |
| G5481-61009 |
PCA, Lid Hotel Bottom Board, 5V Input |
66421.3 |
| G5486-60000 |
BenchBot, Encoder Battery Assembly |
5263.4 |
| G5486-60001 |
BenchBot, J1 Motor Assembly |
23502.7 |
| G5486-60002 |
BenchBot, J1 Stage 1 Belt |
2777.1 |
| G5486-60003 |
BenchBot, J1 Stage 2 Belt 400mm |
5185.6 |
| G5486-60005 |
J2 Motor Assembly with 9 mm Pulley |
20467 |
| G5486-60006 |
J2 Belt, 9mm |
2777.1 |
| G5486-60007 |
BenchBot, J3 Motor Assembly |
19585.6 |
| G5486-60008 |
BenchBot, J3 Belt |
5185.6 |
| G5486-60009 |
BenchBot, J4 Motor Assembly |
17627 |
| G5486-60010 |
BenchBot, J4 Belt |
5185.6 |
| G5486-60011 |
BenchBot, Gripper, low profile |
90351.6 |
| G5486-60012 |
BenchBot, Gripper Pads (Set of 4) |
909.1 |
| G5486-60013 |
BenchBot, G1400B Controller |
49455.5 |
| G5486-60015 |
BenchBot, G1100T Slave Controller |
18018.7 |
| G5486-60016 |
BenchBot, 24 VDC Power Supply |
8527.6 |
| G5486-60017 |
BenchBot, 48 VDC Motor Power Supply |
17627 |
| G5486-60018 |
BenchBot, Slip Ring Cable assembly |
8840.4 |
| G5486-60019 |
BenchBot, Cable Assy, FFC, J4 Motor |
3457.1 |
| G5486-60020 |
BenchBot, Cable Assy, FFC, J4 ENCODER |
2380.5 |
| G5486-60022 |
BenchBot, Fuse, 250 VAC, 6.3A (pair) |
897.8 |
| G5486-60026 |
E-STOP, BENCHBOT, OEM |
13584.5 |
| G5486-60028 |
BenchBot Disable Hub Kit |
105713.5 |
| G5486-60049 |
BENCHBOT, BUMPER PLATE (SET OF 2) |
3111.4 |
| G5486-60050 |
BENCHBOT, GRIPPER FINGERS (SET OF 2) |
5304 |
| G5486-60057 |
Cable, BDH, E-stop Jumper |
1241.6 |
| G5486-65000 |
BenchBot, PCA, J1 Motor Interface |
5893.6 |
| G5486-65001 |
BenchBot, PCA, J2 Motor Interface |
2380.5 |
| G5486-65002 |
BenchBot, PCA, MIDS Interface |
2380.5 |
| G5486-65003 |
BenchBot, PCA, J4 Motor Interface |
2380.5 |
| G5486-65004 |
BenchBot, PCA, Energy Dump |
5893.6 |
| G5486-80005 |
Crate and Foams, BenchBot Robot |
16413.3 |
| G5500-60262 |
Cable,ACU,Light Curtain Jumper |
2241.5 |
| G5500-60263 |
Cable,ACU,E-Stop Jumper |
965.2 |
| G5500-60265 |
Assy,E-Stop,ACU |
3348.8 |
| G5500-60310 |
Card, SmartSlot, Communications, APC |
3799.2 |
| G5500-60435 |
Cold Plate, Microtiter,short side in/out |
73538.6 |
| G5500-60437 |
Coolant Hose, 6 ft, CPC APC/NS2 Fittings |
10819.4 |
| G5500-63001 |
Belt, Endless, AT3, 1476mm long, 6mm W |
2659 |
| G5500-63002 |
Belt, Endless, AT3, 1059 mm long, 6 mm W |
1963 |
| G5500-67020 |
ACU 20A, Support Kit |
83385 |
| G5500-67030 |
ACU 30A, Support Kit |
83385 |
| G5500-69250 |
EXCH-Automation Control Unit, 30A |
70995.8 |
| G5500-69252 |
EXCH-Automation Control Unit, 20A |
70319 |
| G5508-20012 |
Threaded Rod,6 mm Thread,46.6 cm length |
1522.4 |
| G5508-20013 |
Threaded Rod,6 mm Thread,30 cm Length |
1432.8 |
| G5508-20014 |
Spacer, W/ Studs, 25.1mm, MiniHub |
3422.5 |
| G5508-20015 |
Spacer, W/ Studs, 8.4mm, MiniHub |
3142.1 |
| G5508-60001 |
Cable, RJ45 to Agile RS232, 8 in |
1608.3 |
| G5508-60002 |
Cable, Phoenix Jack to Agile Power, RT2 |
2150.2 |
| G5550-01491 |
SHCS M04 X 10 Stainless |
9.4 |
| G5550-01500 |
SHCS M04 X 08 Stainless |
74.4 |
| G5550-01530 |
PIN, DOWEL 1/8 X 5/16 STAINLESS |
74.4 |
| G5550-01679 |
Spring, compression, 1.31 long, .203 od |
221.3 |
| G5550-01859 |
PlateLoc, Rear_Panel |
10660.5 |
| G5550-01877 |
SENSOR, MINATURE OPTICAL, PM-R24 |
1047.8 |
| G5550-01883 |
SWITCH, AIR, TOGGLE, 1/4 QC X 1/4 QC, P |
1207.6 |
| G5550-01884 |
gauge, air pressure, straight back, M5 |
1055.5 |
| G5550-01889 |
SHCS M03 X 10 STAINLESS |
74.4 |
| G5550-01897 |
FLOW CONTROL ELBOW, 1/8 QC X 10-32 |
528.4 |
| G5550-01976 |
PL3 Thermocouple circuit |
3860.2 |
| G5550-01983 |
CYLINDER, MAGNETIC, M12 X 4IN |
6171.2 |
| G5550-01985 |
Cylinder, 16mm bore x 5 mm stroke |
1462.4 |
| G5550-01990 |
PLATELOC SENSOR-IO BREAKOUT BOARD |
18568.4 |
| G5550-01991 |
VACUUM EJECTOR |
7290 |
| G5550-02027 |
POWER SUPPLY, OPEN FRAME, 24 VDC, 22 W |
3858.7 |
| G5550-02032 |
Sensor Pressure, 0-150 PSI, Absolute |
3835.2 |
| G5550-02067 |
THERMOCOUPLE |
450.1 |
| G5550-02140 |
SENSOR, MINIATURE OPTICAL SUNX PM-U24 |
1463.3 |
| G5550-02178 |
Switch, 3 Pole, Bussman Disconnect 30A |
3070.7 |
| G5550-02179 |
SHOCK ABSORBER, 8MM DIA, 6MM STROKE, PL |
1880.5 |
| G5550-02183 |
MeanWell/Astrodyne 600 Watt Supply_24V 2 |
12275.4 |
| G5550-02187 |
Pressure sensor, 1/8 NPT male, M5 femal |
5020.8 |
| G5550-02188 |
SMC Filter Regulator module |
2875.5 |
| G5550-02408 |
POWER SUPPLY, 65 W, 27V |
1074.8 |
| G5550-02418 |
SENSOR, MINATURE OPTICAL, SUNX PM-L24 |
1255.5 |
| G5550-02441 |
BHCS M05 X 35 STAINLESS |
74.7 |
| G5550-02446 |
Washer, Lock, Internal, M04, Stainless |
74.4 |
| G5550-02452 |
Washer, Lock, Split, M04, Stainless |
74.4 |
| G5550-02486 |
Encoder wheel, 2000 cnt, .250 ID |
1241.1 |
| G5550-02487 |
Encoder read head, 2000 cnt., no index |
1947 |
| G5550-02488 |
Power supply, 65W, 24V/5V (PCB) |
2033 |
| G5550-02595 |
DOOR HINGE |
603.3 |
| G5550-02656 |
FHCS M03 X 06 STAINLESS |
64.6 |
| G5550-02657 |
FHCS M03 X 08 STAINLESS |
74.4 |
