| G1532-60675 |
TCD Replacement Cell 6890 |
21874.54 |
| G1532-60685 |
TCD Cell 6890 |
32972.27 |
| G1532-80540 |
Adapter Weldment |
785.35 |
| G1533-80565 |
6890 ECD Make-up gas adapter |
3266.83 |
| G1534-20530 |
NPD Collector Funnel |
1218.14 |
| G1534-40020 |
Insulator, NPD Upper |
1388.77 |
| G1534-40030 |
Insulator, NPD Lower |
1064.46 |
| G1534-60570 |
NPD white bead assembly |
6998.09 |
| G1535-60600 |
FPD IGNITOR CABLE |
518.67 |
| G1544-20590 |
Retaining nut |
401.15 |
| G1544-60575 |
Split/Splitless Insert 6890 EPC |
3503 |
| G1544-60585 |
S/SL Insert Weldment Uses Large Filter |
5433.04 |
| G1544-80530 |
GC Split Vent Replacement Cartridge,2/pk |
1428.32 |
| G1544-80550 |
Split trap assembly (6890) |
2802.4 |
| G1544-80580 |
S/SL Insert Weldment, for use with ECD |
2577.53 |
| G1545-80530 |
PCOC 530um Septum Nut |
1125.48 |
| G1580-60060 |
CPM-1/16x0.10inID Tube Assy, 50cm, Inert |
2313.11 |
| G1580-60575 |
6890 Insert Weldment, for valved systems |
5556.21 |
| G1580-60585 |
Insert Weldment, valved system w/filter |
3890.59 |
| G1580-61060 |
Micro Fluidics 1/16in x 0.010 Union Kit |
5043.19 |
| G1580-80060 |
CPM-1/16in x 0.10in ID Tube x 50cm |
1288.2 |
| G1580-80062 |
CPM-1/16in x 0.20in ID Tube x 50cm |
1202.32 |
| G1600-60002 |
Capillary cassette |
2787.71 |
| G1600-60007 |
Electrode assembly |
4148.23 |
| G1600-60013 |
Capillary cassette for CE/MS |
6822.94 |
| G1600-60027 |
HP 3D CE High Sensitivity cell-replace |
19932.07 |
| G1600-60150 |
Alignment interface 25um |
4158.4 |
| G1600-60210 |
Alignment interface for std cap 50um id |
4217.16 |
| G1600-60230 |
Alignment intrfc light path cap 50um id |
4356.15 |
| G1600-60310 |
Alignment interface for std cap 75um id |
4356.15 |
| G1600-60330 |
Alignment intrfc light path cap 75um id |
4356.15 |
| G1600-62402 |
Plastic Screw for CE 10/pk |
303.97 |
| G1820-65052 |
Carrier gas line connector for conc. neb |
1876.93 |
| G1820-65075 |
O-Ring kit, concentric neb. ICP-MS, 1/pk |
407.93 |
| G1820-65105 |
PFA sample tubing, 0.5mm id,1.6mm od,5m |
893.83 |
| G1820-65435 |
Screws for Skimmer Base (4/pk) |
928.86 |
| G1820-65478 |
PFA sample tubing, 0.3mm id,1.6mm od,3m |
848.63 |
| G1820-65505 |
Drain tank for organic solvent, 2L. 1/pk |
1614.77 |
| G1820-65515 |
Tubing for Drainage (4.0mm id, 2.5m) |
1050.9 |
| G1820-65526 |
Tubing w/guide 0.15 id, 1.6 od, 70cm 5/p |
7000.35 |
| G1820-65527 |
Tubing w/guide 0.2id, 1.6od, 70cm, 5/pk |
7000.35 |
| G1820-65531 |
Tubing w/guide 0.3id, 1.6od, 70 cm, 5/pk |
7000.35 |
| G1820-65533 |
Ferrule + O-ring kit for carrier gas 1/p |
929.99 |
| G1820-65541 |
Basic LC connection kit |
8504.38 |
| G1820-80341 |
Ar Gas Filter |
1948.12 |
| G1820-81012 |
Body Tube assembly (Penning gauge) |
4663.51 |
| G1820-81013 |
Electrode kit for Penning Gauge |
5247.72 |
| G1833-65133 |
Octopole for 7500cs/ce/cx |
11802.85 |
| G1315-45001 |
Lever for Holmium Oxide Filter |
364.99 |
| G1315-60011 |
Semimicro flowcell, 6mm, 5ul, 120bar |
12318.13 |
| G1315-60012 |
Standard flowcell, 10mm, 13ul, 120bar |
12318.13 |
| G1315-60015 |
High pres.micro flowcel,6mm,1.7ul,400bar |
32949.67 |
| G1315-60016 |
Preparative flow cell SS 3mm path length |
14213.14 |
| G1315-60017 |
Preparative flow cell, quartz 0.3mm path |
33609.59 |
| G1315-60018 |
Preparative flow cell quartz 0.06mm path |
33609.59 |
| G1315-60022 |
Standard flow cell 10mm, 13uL, 120bar |
18667.6 |
| G1315-60024 |
Micro Flow cell 2 uL, 3mm path, 120 bar |
22675.71 |
| G1315-60025 |
Semi Micro Flow cell 5 uL, 6mm, 120 bar |
20630.41 |
| G1315-67304 |
Tube-PTFE-ESD-2 0-1 0 |
1233.96 |
| G1315-87312 |
Column connect capillary 150 x 0.12mm |
1185.37 |
| G1315-87313 |
Fused silica/PEEK capillary, 25um 20cm |
1378.6 |
| G1315-87318 |
Fused silica/PEEK capillary, 25um 60cm |
1556.01 |
| G1315-87319 |
DAD heat exchanger capillary 310 x0.17mm |
1128.87 |
| G1315-87321 |
Inlet capillary w heat exchanger 0.17mm |
1185.37 |
| G1315-87323 |
Fused silica/PEEK capillary, 50um 40cm |
1556.01 |
| G1315-87325 |
Inlet capillary w heat exchanger 0.12mm |
1185.37 |
| G1315-87328 |
Fused silica/PEEK capillary, 50um 12cm |
1378.6 |
| G1315-87333 |
Fused silica/PEEK capillary, 100um 30cm |
1378.6 |
| G1315-87339 |
DAD heat exchanger capillary 310x0.12mm |
1128.87 |
| G1316-27301 |
SST Capillary 100x0.12mm, m/m, ns/ns 0.8 |
883.66 |
| G1316-60001 |
Thermal Column Insulation Enclosure Kit |
6708.81 |
| G1316-68706 |
Fitting holder assembly |
1161.64 |
| G1316-68716 |
Capillary kit for 0.12 mm id use of 1200 |
10176.78 |
| G1316-80002 |
Heater Long Up 0.12ID (1.6ul internal) |
3045.35 |
| G1316-80003 |
Heater Long Down 0.12ID (1.6ul internal) |
3045.35 |
| G1316-80004 |
Heat Exchanger/Cooler, 1.5uL |
3099.59 |
| G1316-80012 |
Heat Exchanger 1290 Series long up |
10641.21 |
| G1316-80022 |
LDHE double kit for G1316C |
5011.55 |
| G1316-83200 |
Carrier for heat exchanger TCC SL |
3239.71 |
| G1316-87300 |
Capillary, 0.17x90mm 1/16 in male/male |
710.77 |
| G1316-87303 |
Capillary connect.capillary, 7cm, 0.12mm |
893.83 |
| G1316-87304 |
SST Capillary 130x0.12mm, m/f, ns 0.8 |
989.88 |
| G1316-87305 |
SST Capillary 340x0.12mm, m/m, ps/ns 0.8 |
989.88 |
| G1316-87306 |
SST Capillary 75x0.12mm, m/m, ns/ns 0.8 |
838.46 |
| G1316-87312 |
SST Capillary 50 x 0.12 mm, m/f, ns |
809.08 |
| G1316-87313 |
SST Capillary 70 x 0.12 mm, m/f, ns |
809.08 |
| G1316-87314 |
SST Capillary 90 x 0.12 mm, m/f, ns |
809.08 |
| G1316-87315 |
SST Capillary 130 x 0.12mm, m/f, n-s |
809.08 |
| G1316-87316 |
SST Capillary 170x0.12 mm, m/m, n-s/n-s |
809.08 |
| G1316-87317 |
SST Capillary 210x0.12 mm, m/m, n-s/n-s |
809.08 |
| G1316-87318 |
SST Capillary 300x0.12 mm, m/m, n-s/n-s |
809.08 |
| G1316-87319 |
SST Capillary 340x0.12 mm, m/m, n-s/n-s |
809.08 |
| G1316-87321 |
SST Capillary 105x0.17mm, m/m, n-s/n-s |
809.08 |
| G1316-87323 |
SST Capillary 170x0.17mm, m/m, n-s/n-s |
809.08 |
| G1316-87326 |
SST Capillary 75x0.12mm, f/m, ns 0.8 |
838.46 |
| G1316-87327 |
SST Capillary 170x0.12 mm, m/f, n-s |
809.08 |
| G1316-87328 |
SST Capillary 210x0.12mm, m/m, ps/ns 0.8 |
814.73 |
| G1316-89200 |
Carrier for heat exchanger TCC SL Plus |
3269.09 |
| G1321-60005 |
Flow cell 8ul for FLD |
18503.75 |
| G1321-60007 |
Cuvette 8ul for FLD |
21882.45 |
