| 430-3000 |
Kit, Column Rinse Assembly |
2030.61 |
| 440-1000 |
Kit, Ferrule Tool |
171.76 |
| 450-1000 |
Septum Tool, Knurled Handle |
299.45 |
| 460-1002 |
Snoop,1 Gallon |
1749.24 |
| 500-1004 |
Ferrule, 0.4mm VG 0.25 col 10/PK |
488.16 |
| 5021-1807 |
Label Attention |
13.6 |
| 5021-1816 |
Flexible tubing, green, 105mm, 0.17mm id |
401.15 |
| 5021-1817 |
Capillary ST 0.17x150 |
401.15 |
| 5021-1818 |
Flex capillary, 0.17x280 mm, no fitting |
401.15 |
| 5021-1819 |
Flexible tubing, 400 mm, 0.17 mm id. |
401.15 |
| 5021-1820 |
Flex capillary, 0.12x105mm, no fittings |
401.15 |
| 5021-1821 |
Flexible tubing, 150 mm 1., 0.12 mm id |
401.15 |
| 5021-1822 |
Flexible tubing, 280 mm, 0.12 mm id. |
401.15 |
| 5021-1823 |
Flex tubing, red, 400mm 0.12mm id. |
401.15 |
| 5021-7107 |
Copper tubing, 1/8in 12 ft length |
540.14 |
| 5021-7133 |
GRAPHPACK standard ferrules |
2066.77 |
| 5021-7134 |
GRAPHPACK-std. ferrules 0.7od/0.53id |
2066.77 |
| 5021-7136 |
GRAPHPACK std. ferrules 0.2 id/0.30 od |
2197.85 |
| 5021-7137 |
GRAPHPACK std. ferrules 0.32 id/0.40 od |
2495.04 |
| 5021-7146 |
GRAPHPACK 2M dual column connector |
14721.64 |
| 5021-7148 |
GRAPHPACK dual column connector |
15433.54 |
| 5021-7164 |
GRAPHPACK connector, 0.53in id |
2344.75 |
| 5021-7166 |
GRAPHPACK connector, 0.32/0.25 id |
2351.53 |
| 5021-7168 |
Graphpack injection port connector, 0.53 |
2034 |
| 5021-7170 |
GRAPHPACK standard injector |
2423.85 |
| 5022-2133 |
High Flow union, SS, no fitting |
540.14 |
| 5022-2144 |
T-connector,PEEK 1/16in,0.57ul sewpt vol |
735.63 |
| 5022-2145 |
True ZDV Union |
409.06 |
| 5023-2899 |
Fitting 1/4-28, OD 2.0 ESD-PEEK (6/pack) |
2610.3 |
| 5023-3093 |
Adapter Nut FB 1/4-28-M 5/16-24-F ST |
518.67 |
| 5023-3115 |
Solvent Inlet Filter 20um, 2/pack |
2088.24 |
| 5023-3150 |
ZDV Union M4-M4 |
532.23 |
| 5039-0003 |
25pin 2M RS232 Cable Assembly |
767.27 |
| 5040-4649 |
Scrw Cap,PTFE/silicone pre-slit bond 500 |
1822.69 |
| 5040-4667 |
Ergonomic Manual Crimper for 11mm caps |
2521.03 |
| 5040-4668 |
Ergonomic Manual DeCapper for 11mm caps |
3097.33 |
| 5040-4669 |
Ergonomic Manual Crimper for 20mm caps |
2521.03 |
| 5040-4671 |
Ergonomic Manual DeCapper for 20mm caps |
3097.33 |
| 5040-4681 |
Purple screw caps PTFE/Silicone septa |
237.3 |
| 5040-4682 |
multipk screw caps 5 colors 250/cs |
574.04 |
| 5040-4683 |
Light blue screw cap PTFE/Silicone septa |
239.56 |
| 5042-1337 |
1/16in PEEK fittings for 8p valve. 10/pk |
2013.66 |
| 5042-1389 |
Mat 96, Rd, pre-slitted, silicone 50/pk |
4269.14 |
| 5042-4769 |
Drainage Tank,Polyethylene,4 liter |
233.91 |
| 5042-4799 |
Peri pump tube Fluran 3-stop yel/blu 1/p |
2460.01 |
| 5042-6443 |
Back pressure regulator, 100 psi |
2023.83 |
| 5042-6458 |
Test tubes, 30 x 100 mm - 58 mL, 100/pk |
701.73 |
| 5042-6459 |
Test tubes, 25 x 100 mm - 35 mL, 100/pk |
600.03 |
| 5042-6461 |
Tube PEEK 0.13x5000mm, 1.6mm |
899.48 |
| 5042-6463 |
Tube PEEK 0.25x5000mm, 1.6mm |
690.43 |
| 5043-0055 |
Collapsible ferrule, CTFE 1/8 in, 10/pk |
459.91 |
| 5043-0063 |
Peri Pump Tube 3 Bridged Purple/wht 12/p |
714.16 |
| 5043-0064 |
Sample Bottle 250mL For 5x60mm Std Rack |
77.97 |
| 5043-0259 |
Ferrule Front Sealed ID0 8 |
63.28 |
| 5043-0277 |
Blank nut long 10-32 |
381.94 |
| 5043-0403 |
Ring Nut, Gas Clean Filter System |
135.6 |
| 5043-0502 |
Conical adapter, 1/16 in od sample line |
241.82 |
| 5043-0915 |
Mounting tool for fitting |
179.67 |
| 5043-1190 |
InfinityLab vent valve with time strip |
287.02 |
| 5043-1191 |
Thread adapter, PTFE GL45(M) to GL40(F) |
1279.16 |
| 5043-1192 |
Thread adapter PTFE GL45(M) - GPI 38(F) |
1279.16 |
| 5043-1193 |
Charcoal filter 58g w. time strip |
1239.61 |
| 5043-1195 |
Screw plug 1/4in for cap, PTFE |
470.08 |
| 5043-1196 |
Waste can GL45, 6 liter |
287.02 |
| 5043-1198 |
Screw plug 1/8in for cap, PTFE, 2/pk |
522.06 |
| 5043-1207 |
2 ports waste collector, PTFE |
1958.29 |
| 5043-1214 |
Fitting OD 1.6mm for cap, PFA (2/pk) |
326.57 |
| 5043-1215 |
Fitting OD 2.3mm for cap, PFA (2/pk) |
326.57 |
| 5043-1216 |
Fitting OD 3.2mm for cap, PFA (2/pk) |
326.57 |
| 5043-1217 |
Stay Safe Cap GL45 1 port 1 vent vlv |
914.17 |
| 5043-1218 |
Stay Safe Cap GL45 2 ports 1 vent vlv |
1096.1 |
| 5043-1219 |
Stay Safe Cap GL45 3 ports 1 vent vlv |
1383.12 |
| 5043-1220 |
Stay Safe Cap GL45 4 ports for waste |
1618.16 |
| 5043-1221 |
Waste can GL45, 6L + GL45 4 ports cap |
1958.29 |
| 5043-1222 |
InfinityLab Stay Safe Cap starter kit |
3588.88 |
| 5043-1245 |
Flex Bench Shelf assy 3 valve mounts |
4218.29 |
| 5043-1252 |
InfinityLab Flex Bench |
38696.85 |
| 5043-1278 |
Waste bin for Flex Bench |
1120.96 |
| 5043-1289 |
Flex Bench Replacement Hardware Kit |
2992.24 |
| 5043-1333 |
Stay Safe Cap GL45 1-port PrepLC |
1135.65 |
| 5043-1334 |
Stay Safe Cap 2-ports PrepLC |
1344.7 |
| 5043-1335 |
Fitting for 4.7mm tubing, 2/pk |
522.06 |
| 5043-1336 |
Stay Safe Cap S60 4 ports for waste |
1761.67 |
| 5043-1337 |
10-liter waste can, S60 thread |
313.01 |
| 5043-1540 |
6m Tube ESD PTFE OD1.6 ID0.8 |
1579.74 |
| 5043-1695 |
InfinityLab Stay Safe cap, GL38, 4 ports |
2741.38 |
| 5043-1698 |
InfinityLab Stay Safe cap, GL38, 1 port |
1436.23 |
| 5043-1711 |
InfinityLab Benchtop |
25705.24 |
| 5043-1725 |
Tray Accessory Kit, Flex Bench |
2741.38 |
| 5043-1735 |
Drawer for Flex Benches |
2596.74 |
| 5043-1750 |
Shelf assembly for accessories |
3453.28 |
| 5043-1789 |
Bottle Head Tubing, UCT, 2280mm, 4/pk |
2701.83 |
| 5043-1790 |
Bottle Head Tubing, 2280mm, 4/pk |
456.52 |
| 5043-1816 |
Solvent Line Label Clip Set |
131.08 |
| 5043-1826 |
Plate for 15 x 6ml Vial - Prep |
1566.18 |
| 5043-1847 |
Fittings ESD PEEK 5/16 to 3/16in, 12/pk |
7178.89 |
| 5043-1986 |
LC Waste Container (5L) |
653.14 |
| 5043-1987 |
MS Waste Container |
255.4 |
| 5043-1988 |
Elbow, 90°, 1" barb to 1" NPT, PP |
195.49 |
| 5043-9300 |
WP 96/2.2ml, Sq, U, 41mm, PP, 30/pk |
2109.71 |
